北京精时恒达钟表有限公司

　　精时恒达手表全国连锁维修点(请选择您就近的维修点咨询售后事宜)

　　精时恒达名表连公司成立于2001年是一家专注于手表维修的现代化大型服务型企业。公司总部位于北京，在全国各大中型城市设有维修服务中心，形成了庞大的手表售后维修服务网络，为广大消费者提供方便、快捷的手表维修服务!

　　【精时恒达手表售后维修中心门店图】

　　【图为：手表抛光工作台】

　　【上图为：手表做真空、压缩、冷凝及防水测试的设备】

　　表壳或表带上局部的深度划痕，要着重在局部先用油石做打磨。这个需要在放大镜下进行，目的是给划伤均匀地磨平，当划痕基本都被磨去磨平后，选择粒度合适的砂纸，沿着原来的拉砂纹路去磨，通常这个纹路都是以表盘为中心呈放射状的，所以，这是个仔细活，要一点点的来，磨出来的效果才会好才逼真。

　　而对于又有拉砂又有抛光工艺的表壳和表带，修整的时候应该先做拉砂打磨，然后再做抛光打磨，只不过是需要把已经修整好的拉砂部位给遮盖上，简单的可以用胶纸，正规些的就要做金属模板了，同样用于抛光时的遮盖。手表的抛光打磨是比较精细的工作，且需要依托专业的维修机械，建议还是送去专业的手表维修服务机构。

　　手表在长期佩戴和使用的过程中一定会出现会出现划痕磕痕，再细心呵护的人都很避免这样的情况产生，甚至一些使用年限比较久的手表甚至会出现锈斑和变色的情况。那么，这些情况如何解决呢?您可以通过抛光打磨等修复方法来为您的手表进行“美容”。

　　作为表壳表面的工艺，基本上有两种：抛光的和拉砂的，或者两者兼有，修磨手表表壳上的划伤，也要按照原来的工艺去做，大面积的毛道类的磨损，比较好办但是若有比较深的硬划伤，就要麻烦些，因为无论是抛光或者拉砂的手法，都不足以磨去这样的划痕。

　　技术性的方面，在于一定要所有的拉砂纹路都要走向一直，而且都是以表盘中心起，并呈放射状的。所有手表表壳和表带上面的划痕，要想去掉它或给手表外观做个翻新美容，都可以参照用这个方法操作。直线形状的纹路比较好办，假如纹路是同心圆的，那还是应该使用电动类的机械去做。

case or local deep scratches on the watchband, to focus on the local first stone grind. This needs to be under a magnifying glass, the purpose is to scratch evenly polished, when basic scratches are going to grind, choose suitable size to sandpaper, grinding along the original sand drawing lines, so the lines are usually on the dial radially, and this is a carefully, to a little, the effect will be good to rub out the realistic.

and pull sand and polishing watchcase and watchband, dressing time should first pull sand, and then polished, just need to have trimmed to cover the upper part of the pull sand, simple to use tape to do more of the regular metal mould board also, for the polishing of the cover. The polishing of the watch is relatively fine work, and the need to rely on professional maintenance machinery, it is recommended to send a professional watch maintenance services.

watches in the long process of wear and use will appear will be scratch knock marks, then people are very careful to avoid such a situation, even some relatively long life watch there will even be rust and discoloration of the situation. So, how do you solve these conditions? You can make "beauty" for your watch by polishing and polishing ".

as a process case surface, basically of two kinds: polishing and sand, or both, grinding watch case on the scratch, but also in accordance with the original process to do a large area of hair road wear, but relatively easy to handle if hard scratch is deep, will be trouble some, because both polishing and sand drawing techniques, are not enough to remove the scratches.

technical aspects, it is certain that all of the pull sand lines have to go all the time, but also from the center of the dial, and a radial. All of the above watch case and watch strap scratches, to get rid of it or to make a watch appearance renovation of beauty, can refer to this method of operation. The line shape of the grain is easier if the lines are concentric circles, it should still use electric machinery to do.

精时恒达全国连锁维修：400-875-1181全国百家连锁，**名表维修**，服务地区：北京 、上海、广州、杭州、深圳、沈阳、南京、太原、成都、 天津、 南昌 、武汉 、、等等