Mobil DTE PM™150 220 320 Ashless Series电话13392196659谭小姐
Product Description
Mobil DTE PM™ Ashless oils are high-performance, low aquatic toxicity, lubricants specifically designed for demanding industrial paper machine circulating systems, helping protect both gears and bearings operating under severe conditions. They exhibit good viscosity characteristics helping reduce start-up to production times as well as maintaining equipment protection at high temperatures. The carefully selected base oil and metallic free additive system allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) while providing excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance.
Mobil DTE PM Ashless Series are formulated to be free of metallic additives and phenols to help minimize impact to water treatment streams.
Features and Benefits
The Mobil DTE PM Ashless series oils can help extend maintenance intervals and improve production capacity by providing the following performance features:
- Excellent gear scuffing and wear protection can help to minimize equipment failures and maintenance downtime.
- Enhanced oxidation and thermal stability can help extend oil life versus mineral oils, maintain system cleanliness, and minimize unexpected equipment downtime.
- Excellent rust, anti-foaming, and filterability performance helping protect equipment under severe operating conditions.
- Effective water separation performance helps allow easy removal of water coupled with minimal emulsion formation to help improve lubricant film strength.
Applications
- Lubrication of industrial paper machine circulating systems
- Applications involving circulation systems operating over a wide temperature range
- Systems that must be started and brought on line quickly
- Circulation systems lubricating gears and bearings
Specifications and Approvals
| Mobil DTE PM Ashless meets or exceeds the requirements of: | 150 | 220 | 320 |
|---|---|---|---|
| SKF requirements for paper machine oil dryer section | X |
Typical Properties
| Mobil DTE PM Ashless | 150 | 220 | 320 |
|---|---|---|---|
| ISO Viscosity Grade | 150 | 220 | 320 |
| Viscosity, ASTM D 445 | |||
| cSt @ 40ºC | 150 | 220 | 320 |
| cSt @ 100ºC | 14.6 | 18.7 | 24 |
| Viscosity Index, ASTM D 2270, min | 97 | 97 | 97 |
| FZG 4-Square Load Support, DIN 51354, fail stage | 12 | 13 | 13 |
| Demulsibility, minutes to 40/37/3, 82º C | 5 | 10 | 15 |
| Acute Aquatic Toxicity (LL50, OECD 203) | Pass | Pass | Pass |