建筑用四孔橡胶垫块建筑用四孔橡胶垫块圆形球冠板式橡胶支座这更没什么可抱怨的。在镇上，韩立随便找了家客栈住下，连夜研读起了那本《丹道评鉴》，结果一夜未睡。因为结丹时，哪怕只百分之一的几率，也是要结丹修士求之不得的事情啊。但话说回来了，韩立心里也明白。若去的话肯定危险不小，天知道会遇上什么样的棘手之事。但是韩立对这“降尘丹”的确之极，毕竟无论他还是曲魂，可都面临着结丹啊。他姑且不说，根本没指望这次能成功。但曲魂的煞丹说是有三分之一的结丹率，但还是失败的可能性占多数。他实在放心不下，这“降尘丹”一定要才行。韩立在客栈内苦苦思量了大半日后，还是终决定冒险一试。毕竟到时他和曲魂可是两名筑基后期的修士，就是有什么危险，自保应该不成问题的。

圆形球冠板式橡胶支座的是在板式橡胶支座的顶部用橡胶制造成球形表面，球冠中心橡胶厚为4-8mm,它除了公路桥梁板式橡胶支座所具有的所有功能外，通过球冠调节受力状况，适用于有纵横坡度的立交桥及高架桥，以适应2％到4％纵横坡下，其中桥梁与支座面的中心趋于圆形板式橡胶支座的中心。梁端反力通过球面表面橡胶逐渐扩散传至下面几层钢板和橡胶层。
The circular spherical rubber bearing is on the top of the rubber bearing with rubber manufacturing into spherical surface, the spherical center of rubber thickness is 4-8mm, which in addition to all the features of highway bridge plate rubber bearing has, adjusting force through the spherical cap, suitable for vertical slope of overp bridge and viaduct, to accommodate 2% 4% vertical and horizontal slope, the bridge and the bearing contact center to circular plate rubber support center. The reaction force at the end of the beam diffuses gradually through the surface rubber of the spherical surface to the lower layers of steel plate and rubber layer.

圆形球冠板式橡胶支座在支座底面加一圈直径D=2.5mm的半圆形橡胶圆环，支座受力时首先由底部圆环变形压密，调节底面受力状况，以或避免橡胶支座底面脱空现象的产生，使支座底面受力均匀。
Semi circular rubber ring at the bottom surface of the supporting seat with a ring diameter of D=2.5mm, bearing force first by the bottom ring deformation compaction, adjust the bottom stress condition, to improve or oid the rubber bottom void phenomenon, make the bearing bottom uniform stress.
建筑用四孔橡胶垫块圆形球冠板式橡胶支座的特点球冠橡胶支座的顶部为球冠状，底部一般采用有半圆形圆环或者四氟板(F4)，所以它能具有很好的各向同性的特性，因此在工作时能够既有效地适应桥梁支点的转角位移需要，
The characteristics of top spherical rubber bearing circular spherical rubber bearing for spherical crown, is commonly used at the bottom of semi circular ring or PTFE (F4) characteristics, so it can he good isotropic, so the work can not only effectively adapt to the rotation angle displacement of bridge support,

又能保证上部结构的荷载能有效地传递给下部结构，又可避免板式支座的边缘固偏心受力大容易和脱空现象的发生。球冠橡胶支座可万向转动，万向承载，能很好地上部结构各种荷载（如恒载、活载、风、地震力等）所产生的反力的传迅、转动、要求，保证反力合力集中、明确、可靠。A本产品能用于各种高架桥坡梁，斜交梁及曲梁等结构独特的桥梁结构中，且造价便宜，安装方便，使用可靠，便于推广应用性.
It can also ensure that the load of the upper structure can be effectively transferred to the lower structure, and it can oid the eccentricity of the edge of the plate bearing, the large force, easy to destroy and the phenomenon of the city. The spherical rubber bearing can rotate universal, universal bearing, can satisfy the various loads of upper structure (such as dead load, live load, wind and earthquake force) produced by the anti force transmission fast, rotating and moving requirements, to ensure that anti force, clear and reliable. A this product can be used in all kinds of viaduct bridge, inclined beam and curved beam and other unique structure of bridge structure, and the cost is cheap, convenient installation, safe and reliable use, easy to promote application
矩形网架橡胶垫块圆形球冠橡胶支座的分类本产品：可以分为:球冠圆板式支座和聚四烯球冠圆板式支座。若在支座底面粘贴一块与支座平面尺寸相同的聚四烯板则称为聚四烯球冠支座.橡胶分类：CR（氯丁胶）；NR（天然胶）外形尺寸：d（直径）xt（厚度）（mm）；形式代号：F4表示四氟滑板支座；不加代号为普通支座。名称代号：TCYB表示普通圆形球冠橡胶支座；
The circular spherical rubber bearing the clification of products: can be divided into: coronal circular plate bearing and PTFE spherical circular plate type bearing. If the bearing is glued to the bottom of a block and the bearing plane of the same size Teflon plate is called PTFE spherical rubber bearings. Clification: CR (CL Ding Jiao); NR (natural rubber) size: D (diameter) XT (thickness) (mm); form symbol: F4 said PTFE sliding bearings; not add code for common support. Name: TCYB represents a general circular spherical rubber bearing;

建筑用四孔橡胶垫块桥梁橡胶支座是由多层橡胶与钢板硫化粘合而成,它有足够的竖向钢度,能将上部构造的反力可靠的传递给墩台;有良好的弹性,以适应梁端的转动,又有教大的剪切变形能力,以上部构造的水平位移。
Bridge rubber bearing is comed of multilayer rubber and steel plate vulcanization bonding, it has enough vertical stiffness can force reliable transfer to the pier superstructure; he good flexibility, in order to adapt to the rotation of the beam end, and large shear deformation ability, to meet the horizontal displacement of superstructure.
在板式橡胶支座表面粘复一层1.5mm-3mm厚的聚四烯板,就能制作成聚四烯滑板式橡胶支座它除了竖向钢度与弹性变形,能承受垂直荷载及适应梁端转动外,因聚四烯板的低系数,可使梁端在四氟板表面,水平位移不受,特别适宜中、小荷载,大位移量的桥梁使用。
After the Teflon plate 1.5mm-3mm thick layer in the laminated rubber bearing surface, can be made of PTFE sliding plate rubber support in addition to its vertical stiffness and elastic deformation under vertical load and can adapt to the rotation of the outer end of the beam, due to the low friction coefficient of PTFE plate, the beam end in PTFE sliding surface and the horizontal displacement is not restricted, especially suitable for medium and small load, large displacement bridge use.
圆形球冠板式橡胶支座桥梁橡胶支座特点：桥梁橡胶支座不仅技术性能优良,还具有构造简单、价格低廉、无需养护 易于更换缓冲隔震、建筑高度低等特点.因而在桥梁界颇受欢迎,被广泛使用。
The characteristics of bridge rubber bearings: bridge rubber bearing not only excellent technical performance, but also has the advantages of structure, low cost, no maintenance is easy to replace the shockproof, building height is low. So in the bridge area is very popular, widely used.
根据桥梁橡胶支座的结构型式分类如下：盆式橡胶支座、板式橡胶支座、矩形橡胶支座、球冠圆板式橡胶支座、圆型板式橡胶支座等。

韩立当然不会幼稚的轻易透露自己的底细，就故意左盼右顾的和辛如音兜起了***。

According to the following structure of bridge rubber bearing clification: pot rubber bearing, rubber bearing, rectangular rubber bearings, spherical circular plate rubber bearing, circular plate rubber bearing etc..
建筑用四孔橡胶垫块桥梁橡胶支座按胶种适用温度分类如下：
The bridge rubber bearings are clified according to the temperature applicable to the rubber species:
1、氯丁橡胶：适用温度+60℃∽-25℃
1, chloroprene rubber: suitable temperature +60 to -25 degrees
2、天然橡胶：适用温度+60℃∽-40℃
2, natural rubber: suitable temperature +60 to -40 degrees
3、三元乙丙橡胶： 适用温度+60℃∽-45℃
3, three EPDM: suitable for temperature +60 to -45 degrees
桥梁橡胶支座的适用范围：
The applicable scope of bridge rubber bearing:
1、普通桥梁橡胶支座适用于跨度小于30m、位移量较小的桥梁。不同的平面形状适用于不同的桥跨结构,正交桥梁用矩形支座;曲线桥、斜交桥及圆柱墩桥用圆形支座。
1. Common bridge rubber bearings are suitable for bridges with spans less than 30m and small displacement. Different plane shapes are suitable for different bridge span structures, rectangular supports for orthogonal bridges, circular supports for curved bridges, skew bridges and cylindrical piers.
2、圆形球冠板式橡胶支座四氟板式橡胶支座适用于大跨度、多跨连续、简支梁连续板等结构的大位移量桥梁。它还可用作连续梁顶推及T型梁横移中的滑块。矩形、圆形四氟板式橡胶支座的应用非别与矩形、圆形普通板式橡胶支座相同。
2, PTFE laminated rubber bearing is suitable for large span and multi span continuous beam, continuous plate structure of the large displacement bridge. It is also used as a continuous beam and T beam trersing the top slider in the. The application of rectangular and circular PTFE plate rubber bearings is the same as that of rectangular and circular ordinary rubber bearings.

这几年，木门行业一直保持高速增长态势，吸引了大量的资本和人才的注入把木门行业到了一个新的高度，更多的人加入让木门行业市场走向饱和状态这两年的木门市场低迷让整个木门行业的经营者战战兢兢如履薄冰，唯恐成为这场行业风暴中的淘汰者。在木门终端店面的木门样板的布置也是一个门店的重要部分，对销售的成交量有着非常的**。在木门经销商看来，木门样板也是门店的一大笔投入，不能小看，所以木门经销商对木门样板的选择很上心就木门市场购买了来看，可以根据金字塔分析法来分析。据行业人士介绍，木门店上样，首先要考虑两点，一是根据木门的终端零售成交分析，木门产品本身是消费者产生购买动机和购买行为的重要动因，很多客户是凭自己的眼感觉和喜欢程度来决定是否购买这套木门，如果木门样板选择不当，就会错失成交良机二是木门产品是大件定制产品，每套的总价都比较高，面积比较大而且必须配合装修来销售氛围，所以木门样板一旦上样后，如不，更换的成本是比较高的。木门经销商开店想赢家通吃，一网打尽所有的消费者，是很不现实的，所以，必须有自己明确的目标市场和目标顾客。目标市场和目标顾客的选择，简单的去划分，就是低中高三档的呈金字塔状的市场格局。中档代表国内的小康水平或是中产阶层，代表是中富或富豪阶层。木门经销商根据自身代理的品牌定位和产品定位来锁定自己的目标市场和目标顾客低档居多的消费群一般处在内地的二市场。他们对耐用消费品如定制类产品的消费理念与消费意识相对较为淡薄。从大众消费者的角度上，经销商木门样板主要考虑以经济适用为主，色彩丰富，产

下一篇：http://www.cntrades.com/member/http://www.cntrades.com/b2b/hsxingyv/news/itemid-3512273.html

建筑用四孔橡胶垫块